|
ZB 80CC SILVER SLANT LIMITED EDITION DESIGN ADVANTAGES :
- LIMITED EDITION 80CC SLANT ENGINE
The strongest bicycle engine out there. This engine features a 45 degree angled spark plug and include a steel intake manifold, with a larger inner diameter for improved performance. This engine has a 1 3/8 (1.375) inch diameter downtube engine mount accomodating the most common bicycle frames. Higher grade nuts and bolts are used throughout the entire engine.
- HIGH QUALITY FUEL LINE
Improved fuel line quality is included with these kits that don't get hard over time.
- IMPROVED GAS TANK FASTENERS AND MOUNTS
Strong gas tank clamps are now packaged which help create a secure bracket mount for the gas tank to the frame of the bicycle. The gas tank mounting bolts measure 1 1/8 (1.125) inches long and a spring loaded gas tank cap is included.
- NEW DESIGN IDLER PULLEY WITH ROLLER BEARINGS
Stronger and more durable idler wheels, and a quieter and more fluid roller system.
- THE LATEST EPA APPROVED CATALYTIC HUSH MUFFLER & CLAMP
The hemispherical (half-circle) endcap and larger exhaust pipe diameter make for a smoother-running, more powerful engine. A catalytic converter has been pre-installed and is included within the exhaust muffler which have are EPA Approved. A clamp for holding the Exhaust Muffler to the frame of the bike is included with this package.
- CLUTCH REMOVAL TOOL AND MUFFLER SUPPORT
The clutch removal tool is included with this package and will definitely come in handy for maintenance down the road. The muffler support design has been improved.
- LARGE FRAME TUBE ADAPTER
The large frame tube adapter accommodates up to 2 inch diameter down tubes.
- ADDITIONAL SPARE PARTS INCLUDED
These packages include an extra pack of spare parts including 2 x Exhaust Gaskets, 1 x Master Link and Keeper, 1 x Rear Engine Mount, 1 x Rear Engine Mount Clamp, 1 x Spark Plug. These items alone are valued over US$20.00 .
This complete bicycle engine kit package comes with every thing that you'll need to convert any regular 26" single speed or multi speed mountain bike into a motorized bike. You'll still be able to pedal the bike and ride like normal or start the engine by releasing the clutch lever. There's no rope pulling needed. You can stop or start the engine as you ride. Twist grip hand throttle controls speeds from 38 to 53/kmph depending on the gear ratio. This installation kit comes with a 44 tooth 9 hole sprocket with easy to install 9 bolt universal mounting hardware that clamps over the rear wheel hub and spokes. This creates a totally independent drive sprocket and chain that does not interfere with your current drive chain or peddling.
With the built in clutch you maintain full function of the original bike. Pedal, shift, and ride your bike like normal. The engine kit only adds about 20lbs to your bike. When you want to engage the engine simply release the clutch hand lever and the engine springs to life. To power off, simply press the included kill switch.
What do I need to put my motorized bike together?
1. Requires basic mechanics and simple tools (any mechanical experience always helps!)
2. It takes about a few hours to install while using easy to follow detailed instructions (which can be downloaded by clicking here: Installation Guide or by copying and pasting this URL link into your browser: http://www.gasbikeshop.com/downloads/usermanual.pdf). If you are unable to download or access the file, please email us at
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
and we will be happy to email a copy over to you directly.
What type of bicycles with these engines fit on?
The engine requires a clearance of at least 15 inches in height on the seat tube (the part of the frame under the seat) and 14-15 inches in length on the down tube (the diagonal part of the frame), and it is approximately 5 inches wide. To help with determining whether or not the engine will fit in your frame, we have prepared a template for the engine which can be found by clicking here: Engine Template or by copying and pasting this URL link into your browser: http://www.gasbikeshop.com/downloads/engine-template.jpg .
We recommend installing these kits on bicycles with a 1 inch diameter seat tube and with a 1-1.25 inch diameter on the down tube.
We have a gallery available on our website and you'll be able to view a selection of bicycles that these engines have been installed on.
Model : ZB-80S-SR
Engine type :
Single cylinder, air-cooled, 2-stroke
Power * Rotary Speed
Rated Power :
2.5Kw / 5000r / min
(3HP/5000r/min)
Max Power :
3.5Kw / 6000r / min
(5-6HP/6000r/min)
Ignition Mode : CDI
Fuel type : Octane 89 and above
Lubrication Oil : 2 Stroke Synthetic Motorcycle Oil
Mixing Ration for Fuel and Oil : 16:1 for new engines (20:1 after running approx 500Km)
Spark Plug : 4118C
Fuel Consumption : 2.5L / 100Km
Clutch Type : Friction Plate / Dry
Speed Limitation : 38-50km/hour
What's included:
Engine Box #1
- 1 x 80cc Silver Limited Edition Bicycle Engine (Model: ZB-80S-SR)
- 1 x Dished 44 Tooth sprocket with 9 holes
- 1 x Thottle Assembly with built in Kill Switch and Matching Grip
- 1 x 48 inch Thottle Cable with tension adjuster
- 1 x 56 inch Clutch Cable with Heat Protection Spring, Separator Spring, and Clutch Cable Keeper
- 1 x Glossy Black Heavy Duty Push Clutch Lever
- 1 x 53 inch Heavy Duty 415 Chain
Gas Tank Box #2
- 1 x 1.8L (1/2 Gallon) Glossy Black Finish Gas Tank
- 1 x Spring Loaded Gas Tank Cap
Accessories Box #3
- 9 x Sets of Mounting Bolts, Washers and Nylock Locking Nuts for the Sprocket Assembly
- 2 x Rubber Sprocket Mounts
- 3 x Semi-circle Metal Sprocket Mounts
- 4 x Nylock Gas Tank Mounting Nuts
- 1 x High Quality Fuel Grade Line
- 1 x Inline Soft Plastic Fuel Filter
- 1 x Gas Fuel Valve with Nylon Fuel Filter and Fibre Washer
- 1 x Spark Plug
- 1 x Spark Plug Removal Tool
- 1 x Black Chain Guard
- 1 x Chain Guard Fasteners
- 2 x Fuel Tank Fasteners
- 1 x EPA Approved Exhaust Muffler with built in Catalytic Converter
- 1 x Heavy Duty Exhaust Muffler Clamp with Nyloc Nuts
- 1 x Adjustable Bearing Chain Tensioner
- 1 x CDI (Capacitor Discharge Ignition) Module with mounting assembly
- 1 x Large Frame Tube Adapter mounting plate with U Bolt and Engine Adapter Bolts.
- 1 x Parts Pack (2 x Exhaust Gaskets, 1 x Master Link and Keeper, 1 x Rear Engine Mount, 1 x Rear Engine Mount Clamp, 1 x Spark plug)
User Manual
- Includes all the specifications, performance ratings and parameters.
- Outlines Spark plug and clutch adjustment procedures.
- Troubleshooting tips.
- Basic installation of rear sprocket and engine instructions. More detailed instructions are also available (which can be downloaded by clicking here: Installation Guide or by copying and pasting this URL link into your browser: http://www.gasbikeshop.com/downloads/usermanual.pdf). If you are unable to download or access the file, please email us at
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
and we will be happy to email a copy over to you directly.
- Parts breakdown and diagram of engine breakdown.
This Bicycle Engine Kit package is EPA Approved and meets all requirements for shipping within Canada and the United States.
|
Disclaimer:
- Operating this motorized bicycle or bicycle engine kit involves some risk of serious bodily injury . Buyer accepts responsibility for any and all vehicle operation that may lead to personal injury, economic loss, social distress, other losses, costs and damages.
- Seller is not responsible for injuries and/or damages resulting from operating this motorized bicycle or bicycle engine kit.
- Not all motorized bicycles are permitted for road use. Check with your local Vehicle Insurance services for requirements. We do not offer any guarantee for legal road use.
- California Residents: We strongly advise checking with the California Air Resource Board (CARB) regulations for the use of this product within your region.
Important Note:
Over the years our manufacturers have advertised their largest sized engines as 80cc engines and therefore is listed in the same manner on our site. However based on the results provided at the time of EPA Testing and Certification, these engines have been recorded with a true displacement of 66cc being the largest sized among all bicycle engines currently on the market. There are currently no true 80cc engines on the market to date and we want to make you aware of this.
|
***PLEASE NOTE THAT ONLY THE GAS POWERED KIT IS BEING SOLD. THE BICYCLE IN THE PICTURE IS SIMPLY A DEMO OF HOW THE KIT WILL APPEAR WHEN INSTALLED***
***PARTS AND ACCESSORIES INCLUDED WITH THE BICYCLE ENGINE KIT MAY DIFFER FROM THOSE SHOWN IN THE PICTURES.***
Customer Reviews
-
(Sunday, 16 August 2009)
Rating:
A very good over-all engine, that accelerates fast and has a good top speed. Might take a while to build, but make sure you follow all instructions
and the kit will be well worth your time and money!
-
Daniel52 (Wednesday, 10 June 2009)
Rating:
Nice Product, decent quality, fun to build and fun to drive! Started easily on the first attempt. Had a minor problem with a leaking fuel filter and
Andrew at Zoom Bicycles responded promptly and is sending a replacement. Excellent customer service! I'm very pleased with my motorized Zoom
bicycle!
You may also be interested in this/these product(s)
|
Copyright © 2009 GasBikeShop Motorized Bicycle Engine Kits. All Rights Reserved.