Zoombicycles Shop - What type of frames will the engine mount on ? | Installation
Section Blog Installation What type of frames will the engine mount on ?

What type of frames will the engine mount on ?

31 July 2008 Ronald Moedt
The engine requires a clearance of at least 15 inches in height on the seat tube (the part of the frame under the seat) and 14-15 inches in length on the down tube (the diagonal part of the frame), and it is approximately 5 inches wide.

We recommend installing these kits on bicycles with a 1 inch diameter seat tube and with a 1-1.25 inch diameter on the down tube.

We have a gallery available on our website under www.zoombicycles.com and you will be able to view a selection of bicycles that these engines have been installed on.

The diagram below shows the spacing requirements for V-frame bicycles :

Product Search

Login Form

Sponsored Links

Disclaimer

Operating motorized bicycles or bicycle engine kit involves some risk of bodily injury . Buyer accepts responsibility for any and all vehicle operation that may lead to personal injury, economic loss, social distress, other losses, costs and damages. EHBC Distributors Ltd is not responsible for injuries and/or damages resulting from operating this motorized bicycle or bicycle engine kit . Motorized bicycles are not recommended for use by persons under 16 years of age. Obey all traffic regulations. Always wear a helmet while riding. Never operate your motorized bicycle on a pedestrian through way or sidewalk while the engine is running. Never operate your motorized bicycle in an unsafe manner. Check local and state laws before riding on streets.